• voltage 10 - 16 VDC
• consumption stand by 10 mA, max. 2 A
• working temperature -40 to +125 °C
• instant input negative trigger
• delay door switch negative inp.
  also courtesy light output
• vibration detector digital filter,
  Warning or Alarm
• current sensor 10 min. exit delay
• external siren / immobil. relay output +12 V,
  max. 0.8 A
• exit / entrance delay 30 / 15 sec. (selectable)
• made by Jablotron , Czech Republic.

Arming of the "Pulse" by the ignition key is simple and convenient. If installed, arming can also be done by a hidden push button switch. The CA-01 working mode is indicated by an LED indicator. The built-in vibration detector has a digital filter which provides a high immunity to false alarms. Its response, either a warning or alarm trigger, is selectable. A built-in current sensor will trigger the alarm if an electrical equipment is switched ON while the CA-01 is armed. The current sensor activates 10 minutes after arming. This prevents the cooling fan from triggering the alarm. A negative trigger input can be used for a hood and trunk sensor, or for any additional detector. A negative door switch trigger input provides an entrance delay and this link also works as an Automatic Dome light control output. When an ALARM is triggered, the built-in siren will sound. It is also possible to add an optional external siren in the passenger compartment, and a wireless pager. If an external immobilization relay is installed, any unauthorized use of the car will be blocked.

Some features of the car alarm can be customized in the setting mode. Basic installation of the "Pulse" is very simple, but it can be extended if a more advanced system is desired.